Ford Fiesta 1.0 Mountune review

Ford Fiesta 1.0 Mountune - front
27 Nov, 2015 4:15pm Richard Ingram

Tuning expert Mountune works its magic on the Ford Fiesta's three-cylinder EcoBoost engine

Specialist tuner Mountune has 
been fettling fast Fords for years. 
Fiesta and Focus owners wanting more 
from their hatchbacks have long been able to upgrade their cars with performance-enhancing aftermarket add-ons.

The latest tweaks, available in the MR165 kit, benefit owners of the Fiesta EcoBoost, and can be fitted to 123bhp or 138bhp cars for £1,399. Changes include a high-flow induction kit, larger-capacity intercooler 
and a selection of higher-quality pipes and hoses. The result is 163bhp and 245Nm from the tiny 1.0-litre three-cylinder.

Best hot hatchbacks to buy now

It certainly feels quicker than both the standard-output cars on the road. Put your foot down in third gear and the turbo picks up pace at a surprising lick. You still get that characteristic three-pot thrum, but it feels far less pressured than the standard EcoBoost.

It’s still a light car, too, and from a standstill feels suitably sprightly. In a straight-line drag it’ll out-sprint a VW Polo Blue GT, and comes close to the more powerful GTI. The Fiesta takes 7.2 seconds to do 0-60mph 
– that’s 1.3 faster than the 138bhp model and a full 2.2 faster than the 123bhp car.

But it’s not all brawn and no brain – Mountune has history and knows what it’s doing. The Fiesta was always a good base for a sporty hatch, but the firm’s engineers have made this car even more playful. 
It’s great fun to drive, and sets a
 new benchmark in its class.

Not only is it much quicker than the standard car, but you can throw it around corners with confidence. Grip is good, yet lift off the accelerator mid-corner and you can flick the back end out before the traction control catches you and puts you back on the straight and narrow. However, the 2013 Zetec S-based car we tried had no means of switching this off, resulting in frustrating power cuts on the exit of greasy corners.

In terms of styling, the package’s only changes are subtle bootlid badges. Our car came with extra boy-racer graphics down the side, but these are options. Inside, it’s standard Fiesta – both front and back.

Mountune couldn’t confirm whether the mechanical changes made any difference to economy or emissions, but tweaked cars are likely to cost slightly more to run. There’ll inevitably be a slight drop on the 138bhp car’s 62.8mpg – but if you drive this Fiesta as it’s intended, it’ll fall short of that anyway.

As it’s based on the standard model, both new and existing cars can be upgraded. The set-up can be installed either at Mountune’s HQ in Essex, or at one of the UK’s 13 other approved Mountune PRO Ford dealers. Fitting takes two hours, and doesn’t invalidate your manufacturer warranty. 
In fact, all the additional parts are 
covered for 12 months or 12,000 miles.

4
Mountune’s MR165 kit 
makes the Fiesta EcoBoost 
more eager, but at £1,399 it pushes the price of the existing 123bhp Titanium-spec car dangerously close to that of a basic Fiesta ST. Still, if you already own a 1.0-litre Fiesta and want more power without sacrificing that all-important manufacturer warranty, then Mountune is 
the way to go. The MR165 kit makes a good car even better.
  • Model: Ford Fiesta 1.0 Mountune
  • Price: £15,945 (plus £1,399 kit)
  • Engine: 1.0-litre 3cyl turbo
  • Power/torque: 163bhp/245Nm
  • Transmission: Five-speed manual, 
front-wheel drive
  • 0-60/top speed: 7.2 secs/125mph (est)
  • Economy/CO2: 62.8mpg/99g/km (est)
  • On sale: Now
Thank you for reading the article about Ford Fiesta 1.0 Mountune review in blog station of gear If this article was helpful please bookmark this page in your web browser by pressing Ctrl + D on your keyboard keys.

Artikel terbaru :